Tropical Fish now offers several kits containing replacement components for all Wurlitzer amplifiers. If you already have experience working with electronics, these kits offer a convenient DIY option for restoring your amp. Each kit contains the same high-quality components that we use in our own restorations.

For all amplifiers, we offer the Basic kit as well as several add-on components packages. The Basic kit contains all electrolytic capacitors, power supply resistors, and a few input components for the preamp. For many amplifiers, replacing these components is sufficient for improved reliability and performance.

This Wurlitzer 140a belonged to a producer for many years, and arrived at our shop in well-used condition. By that, we mean that it was pretty banged up and showed evidence of previous repairs. Also, because multiple latches were missing, the lid didn’t attach very well. At some point, it had obviously once been held in place with duct tape.

The Wurlitzer 206 is the student version of the Wurlitzer 200. It is equivalent to the 200 in every day, but it is mounted on a cabinet instead of legs and some features of the amplifier are disabled. However, all of the components that are in a 200 are also present on the circuit board of the 206. Enabling vibrato and the aux output is therefore as simple as adding some wires and a 10k potentiometer. Here is how we do it.

Popping and crackling sounds are a very common problem in Wurlitzer keyboards. Although they may sound dramatic, they’re most often caused by debris in the reed bar. This is very common and mostly harmless to the amplifier.

If you flip a Wurlitzer key upside down, you’ll see two holes underneath. These holes line up with the two metal pins in the keybed that guide the key’s vertical travel. They’re called the key bushings, and they’re lined with felt. As the keyboard is played, this felt becomes compressed over time and the keys no longer fit snugly around the key pin. Or, if these felts become damaged, they could prevent the key’s smooth travel and the touch-responsiveness of the keyboard becomes compromised.

There are many different problems that could make a Wurlitzer’s keys stick. Because sticky keys are so case-specific, there is no cure-all solution. However, here are some ideas as to why your Wurlitzer’s keys are sticking.

The most common sustain problem on a Wurlitzer 200a (or earlier) keyboard is too much sustain: the note continues to ring out, even when the pedal is not depressed. This is almost always caused by damper felts that are excessively compressed or otherwise deteriorated. In other cases, the Wurlitzer’s sustain pedal doesn’t do anything when depressed, and the piano never has sustain. This is usually because the pedal is not making the proper interior connection. This guide will help you address both problems.

The Wurlitzer electronic keyboard was first commercially released by Wurlitzer in 1955 as a convenient (and potentially silent) tool to practice and study piano.  But, almost immediately after its release, the instrument was discovered by professional musical talent such as Ray Charles and found its way to stages and recording studios. Because of the instrument’s unmistakably unique and warm tone and numerous practical advantages, it was a solid choice for recording artists from the very beginning. 

Some issues involving a vintage Wurlitzer electronic piano are complex to resolve. Others are caused by loose hardware, disconnected wires, or pieces of debris. If you’d like to try some easy fixes before you call a tech, here are some steps that you can take.

How do we restore a Wurlitzer electronic piano? Here’s a list of all the issues we commonly address.

When we received our Allen & Heath GS3, it was caked in dust but otherwise in great working condition. We wanted it to sparkle like the technological marvel it was when it was released in 1994, so we took it apart and gave it a deep clean.

Having trouble deciding which Wurlitzer model is right for you? Take a look at our handy infographic!

This infographic is an at-a-glance guide to the features of common Wurlitzer models. All models of Wurlitzers are excellent instruments, and with the right restoration any one of them can become a functional, professional piece of gear. However, all Wurlitzers were manufactured 40+ years ago, at a time when standards for recording were much different. And, anyway, professional musicians weren’t necessarily the most lucrative target audience: that would be schools, who bought keyboards six at a time. So, some features that would be standard today - such as an aux output - are absent from many models.