The sound of a blown speaker is pretty tell-tale - fuzzy, distorted crunchy sound that may be roughly reproducing the signal you are sending through it or making no sound at all.

There are a few scenarios that can cause a speaker to malfunction. A speaker can sustain physical damage to the cone or even the voice coil. Sometimes the damage is obvious. In other cases, the speaker may look fine, and the distortion may be so subtle that you could be wondering if your amplifier is actually at fault. In this article, we’ll share our tips on how to determine whether your speaker or your amp is to blame.

All speakers have an impedance, usually 4 Ω, 8 Ω, or 16 Ω. For the best performance, you should match the impedance of your speakers to the output impedance of your amplifier. When the impedances match, the amp achieves the most efficient power transfer between the speaker and the amplifier. Power transfer, expressed in watts, affects the volume, drive, and overall sound quality of the amplifier.

Every tube amplifier has a preferred speaker impedance: usually, this is something in the neighborhood of 4 Ω or 8 Ω. The preferred speaker impedance of tube Wurlitzers are as follows: